Infrared High Output Space Heater S+ is an ideal way of providing thermal comfort in commercial and industrial buildings.

The heater is constructed using a rod heating element encapsulated within a special aluminium extrusion profile. The surface area of the aluminium profile is treated with a silicating process which substantially increases its surface area and its ability to emit heat. The result is a high efficiency, low maintenance heater suitable for commercial and industrial environments.

Infrared High Output Space Heater S+ is specifically designed for high level mounting - horizontally ceiling mounted with an auxiliary frame or suspended on drop rods or chains. Typical applications include large volume spaces where conventional warm air convection heating systems would be uneconomic, e.g. supermarkets, gymnasiums, showrooms, factories, warehouses, etc.

These electric heating panels are designed to work with our range of air sensing thermostats.

• Localised Heating - only warm the area required e.g. work stations.
• Wall, ceiling mounted or suspended. Infrared High Output Space Heater S+ radiant heat provides totally usable floor and wall space and reduces the risk of damage or vandalism.
• Higher ventilation and air extract rates do not significantly affect the radiant performance of the S+ heater which primarily warms the fabric of the heated area.
• Gentle infrared heat results in improved comfort conditions at lower inside ambient temperature, thus at lower running costs.
• Infrared heating does not cause air convection currents, therefore minimising dust movement and providing a clean, draft free environment.

• Attractive powder coated casing (RAL9002 off white) & grey radiating faceplate.
• Fully insulated galvanised casing with class O foil backed 25mm thick insulation.
• Ceiling mounting frame included in installation kit.
• Heating panel surface temperature – approximately 350°C.
• Protection: Class1, IP x 4, Cable gland to IP44.
• Thermo crystal high emissivity heating panel.

Installation

Due to the high-power outputs Infrared High Output Space Heater S+ must be installed with the following minimum distances from:

• Radiant surfaces / other heaters (up to 260°C) - 1000mm
• Back side of the heater panel (between the ceiling and backside) - 100mm
• Wall - 1500mm
• Floor - 3500mm